Setup; Resolution; Date & Time; Volume - Possio GRETA Manual Del Usuario

POSSIO

7. Setup

7.1 Resolution

Sets the scanner resolution.
• Low
• High (Factory default)
7.2 Date & Time
Sets the date and time to be shown in the display and on printed information. The date
has to be entered in full and is shown in DD/MM/YYYY format. The time is shown in 24h
format.

7.3 Volume

Sets the volume of the beeper.
• Off
• Low
• Medium
• High (Factory default)

7.4 Fax header

Sets the name and number to be shown on the top of the fax page. First type the user
name that is to be shown on the fax header and then enter the number to be shown.
NOTE: If you enter a name and number it will always be shown on the top of
the fax page sent.

7.5 Print out modes

GRETA can be set to only display information (except fax which is always automatically
printed) on screen.

7.5.1 Number presentation

Sets whether to have incoming call numbers printed or only shown on screen. Factory
default is off and number is only shown on the display.
• Off (Factory default)
• On
NOTE: Missed calls will even be printed when number presentation is switched off.

7.5.2 Call duration

Sets whether to have the call duration printed or only shown on screen. Factory
default is off and call duration is only shown on the display.
• Off (Factory default)
• On
16
GRETA USER MANUAL POSSIO

7.6 Language settings

Sets the language version of GRETA from the list below.

7.7 Density control

7.8 Font size

Sets the font size for print outs. Choose small to save paper.

7.5.3 SMS

Sets whether to automatically print SMS or only shown on screen. Factory default is
on and all incoming SMS are printed out automatically.
• Off
• On (Factory default)

7.5.4 Activate all

Sets print out mode to active. Number presentation, call duration and SMS are
printed.

7.5.5 Deactivate all

Sets print out mode to deactive. Number presentation, call duration and SMS are not
printed and ONLY shown on LCD display.
• English (Factory default)
• German
• French
• Spanish

7.7.1 Scan density

Sets the amount of illumination GRETA uses when a document is scanned. If the paper
is thin, like freight documents, use dark density to obtain better contrasts.
• Light
• Normal (Factory default)
• Dark

7.7.2 Print density

Depending on the content and quality of the document being printed use Print
density to obtain better print contrasts. If the document is light use dark.
• Normal (Factory default)
• Dark
• Large (Factory default)
• Small
GRETA USER MANUAL
17