Wood Stud Wall Mounting – See Cautions in Step 2.
1.
Locate stud. Verify the center of the stud with an awl or thin nail or use
an edge to edge stud fi nder.
2.
Level the wall plate [02] and mark the hole locations.
3.
Drill pilot holes as illustrated.
4.
Place the wall plate against the wall. Tighten the lag bolts [25] only
until the washers [26] are pulled fi rmly against the wall plate [02].
5.
Place lag bolt covers [28] over lag bolts [25].
2
4
6901-002090 <00>
13mm
5.5mm
.)
(1/2 in.)
(7/32 in
[02]
[02]
[26]
[25]
1
3
< 16 mm
(5/8 in.)
5
2-1
63.5 mm
2.5 in.
[28]
15