Sanus VisionMount MF215 Manual Del Usuario página 14

2
Wall Mounting
For assistance in determining wall plate location, see Height Finder at sanus.com.
2-1: Wood Stud Mounting
CAUTION:
Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage:

Pilot holes MUST be drilled to a depth of 63.5 mm (2.5 in.), using a 5.5 mm (7/32 in.) diameter drill bit.

Do not over-tighten the lag bolts [25].

Any material covering the wall must not exceed 16 mm (5/8 in.).
2-2: Solid Concrete and Concrete Block Mounting
CAUTION:
Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage:

Pilot holes MUST be drilled to a depth of 75 mm (3 in.), using a 10 mm (3/8 in.) diameter drill bit.

Be sure the anchors [27] seat fl ush with the concrete surface.

Mount wall plate directly onto the concrete surface.

Never drill into the mortar between blocks.

Do not over-tighten the lag bolts [25].
14
CAUTION:
6901-002090 <00>