General Maintenance - Makita DCF300 Manual De Instrucciones

Installing or removing of battery cartridge (Fig. F & G)
Always switch off the tool before installing or removing of the battery cartridge.
To remove the battery cartridge, slide it from the tool while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into
place. Always insert it all the way until it locks in place with a little click. If you can see the red part on the upper side of
the button, it is not locked completely. Install it fully until the red part can not be seen. If not, it may accidentally fall out
of the tool, causing injury to you or someone around you.
Do not use force when installing the battery cartridge. If the cartridge does not slide in easily, it is not being
inserted correctly.
To operate the cordless fan using battery cartridge, please refer to the instruction of battery charger.
Timer setting
The cordless fan can set a run time for 1 hour,  hours, or  hours by the timer switch ( in Fig. A-1).
The number underneath the LED shows the remaining hour for turn off.
NOTE:
• The cordless fan may run less time than the time you set when you use the battery cartridge.
In order to prolong the battery life, the cordless fan has automatic stop output function. If the battery capacity is not
enough, the fan will stop working; this is because of the cordlessfan's self-protect function, rather than breakdown.
Then you need to take out the battery and charge it.
WARNING
• When servicing, ask Makita authorized service centers and with only identical replacement parts. Use of any other
parts may create a hazard or cause product damage.
WARNING
• To avoid serious personal injury, always remove the AC adaptor or battery cartridge from the unit when cleaning or
performing any maintenance.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of com-
mercial solvents and may be damaged by their use. After the portable fan cooled, use clean clothes to remove dirt,
dust, oil, grease etc.
WARNING
• Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils etc., contact with plastic
parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.
• All parts should be replaced at an Authorized Service Center.
STORAGE
To prevent fire or burning, allow the oscillating fan to cool down completely before you store it.
Do not store the discharged battery for long periods, as it can shorten its service life.
SYMBOLS
The following are symbols used for the equipment. Be sure that you understand their meaning before use.
• Read instruction manual.
• (Only for EU countries.)
Cd
Do not dispose of electric equipment or battery pack together with household waste material!
Ni-MH
Li-ion
In observance of European Directive 2012/19/EC on waste electric and electronic equipment,
006/66/EC on batteries and accumulators and waste batteries and accumulators and their imple-
mentation in accordance with national laws, electric equipment and battery pack that have reached
the end of their life must be collected separately and returned to an environmentally compatible
recycling facility.
For technical questions, please contact an Authorized Service Center.
MAINTENANCE
7