MAHLE 480808011 Instrucciones De Montaje página 4

Installation guide
3.4 Make sure that the motor you are about to
install matches the motor you just removed.
Using the catalogue, check the electrical part
number, the direction of rotation, the rated
voltage, the rated current, the fitting dimen-
sions, the electrical connections, etc.
3.5 Also check the following points:
Make sure that the motor cannot be ■
switched on.
Remove the protective cover and plastic
■
plug using a suitable tool.
The sealing surfaces must not be dam-
■
aged.
When working with hydraulic fluids, adhere
■
strictly to the hydraulic fluid manufactur-
er's instructions.
Also follow the machine or system manu-
■
facturer's instructions.
3.6 Tighten the fixing bolts on the electric motor
evenly and to the correct tightening torque.
An incorrect tightening torque may result in
malfunctions, leaks, or increased wear.
8 | © MAHLE 2017 / 2018
3.7 Secure the motor in the installation position.
Information about the required tools and the
tightening torque for the bolts can be obtained
from the machine or system manufacturer if
necessary.
3.8 Connect the electrical cables to the electric
motor. Take care to route the cables properly,
making sure that the cables do not come into
contact with hot or abrasive surfaces.
3.9 Connect the power supply/negative battery
lead to the battery. Before starting the system,
make sure that the battery is fully charged.
Check that the entire electrical system is
working properly according to the machine or
system manufacturer's instructions.