Back; Remote Control - Dynex DX-LCD32-09 Guia Del Usuario

TV components

Back

# Component
1
2 HDMI 2 and HDMI 1
3 VGA AUDIO/PIC
4 COMPONENT IN 1 and
COMPONENT IN 2
5 S-VIDEO/AV IN
6 AV OUT
7 RF
8 RS-232
9 S/PDIF
10 AC POWER
Description
Connect headphones to this
jack.
Connect HDMI devices to these
jacks. You can connect two
HDMI devices.
Connect the audio and video
from a computer to these jacks.
Connect component video
devices to these jacks. You can
connect two component video
devices.
Connect an S-Video device to
the S-VIDEO jack or connect a
standard A/V device to the AV IN
jacks.
Connect a VCR to these jacks so
you can record from your TV.
Connect the antenna, cable TV,
or satellite TV to this jack.
For service only. Do not connect
anything to this jack.
Connect a digital optical audio
device to this jack.
Connect the power cord to this
jack, then plug the other end
into a power outlet.

Remote control

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
# Button
1
(power)
2 ZOOM
3 INPUT
4 COMP
5 HDMI
6 Number buttons
7 RECALL
8 VOL+/VOL–
9 MUTE
10 GUIDE
16
17
18
19
20
21
22
23
24
25
26
Description
Press to turn on your TV. Press
again to enter standby mode.
Press to select the aspect ratio.
You can select Normal, Wide,
Zoom, or Cinema.
Press to open the video input
source menu, press or to
select the video input source,
then press ENTER to confirm.
You can select TV, AV, S-Video,
Component1, Component2,
HDMI1, HDMI2, or VGA.
Press once to select the device
connected to the COMPONENT
IN 1 jacks. Press twice to select
the device connected to the
COMPONENT IN 2 jacks.
Press once to select the device
connected to the HDMI 1 jack.
Press twice to select the device
connected to the HDMI 2 jack.
Press to enter a channel number
or the password.
Press to view the previous
channel.
Press to increase or decrease the
volume.
Press to turn off the sound. Press
again to restore the sound.
Press to open the program guide
(if available) for digital TV (DTV)
programs.
5