Conceptronic Full HD Media Player CFULLHDMA Manual Del Usuario página 36

ENGLISH
The unit needs to be configured when you turn it on the first time.
• Select the correct input channel on your TV where the unit is connected to. (Composite, SCART, S-
Video, Component or HDMI).
Note: From this point, the manual is based on the fact that your TV is set to the input channel of the
unit. All steps described are related to the operation of the unit.
• Turn on the unit with the power button on the back of the unit, or with the 'Power' (1) button on the
remote control.
The unit will turn on: the power LED of the unit will turn GREEN.
The unit will display a splash screen, before it continues with loading the main menu.
Note: The startup time of the unit is about 30 seconds. When the logo screen disappears, the output
signal of the unit will be re-established. This can cause a black screen or no-signal message on
your TV for a moment. Please wait until the main menu appears on your screen.
Note: The default output signal is Composite. If you are using another output for the unit, it is possible
that your screen does not show the menu. Press the 'Output' (16) button on the remote control
to switch the output signal of the unit.
The message displayed on your TV is asking in which language you want to use the unit.
[ Language Selection ]
After the language selection the unit will show the main menu.
The main menu will show the following options:
- My Media
- iMedia
- Setup
6. First-Time use & configuration
Play your media files (through USB or network)
Play internet media (internet video / internet radio)
Change the settings of the unit.
[ Main Menu ]
36