Operating Mode - Samoa 363 100 Guía De Servicio Técnico Y Recambio

EN

OPERATING MODE

DISPENSED
• The gun has a safety lock system that prevents
accidental opening.
• To begin dispensing fluid, push the button on the top
of the trigger while pulling the trigger toward gun
handle to open the valve.
OPEN VALVE LOCK POSITION
• To lock the valve in fully open position, first you must
pull the trigger to its maximum opening.
• Then press the button and hold it pressed while
releasing the trigger until it is locked. At this point you
can release the trigger and the valve will remain open.
• When the gun is locked in open valve position to unlock
it you must press the trigger again without pressing the
button. Then release the trigger and it backs to its
original position, closing the valve.
NOZZLE OPERATION
• The opening of the automatic nozzle is performed
automatically when the fluid begins to flow. When fluid
dispensing ends, the nozzle is closed automatically.
• The opening and closing of the manual nozzle is
performed turning quarter turn the end clockwise and
counterclockwise respectively.
SUPPLY LOCK OVERRIDE
• Depending on the model, the oil gun can be supplied
as standard with a pin (1) to lock the trigger in the open
position.
• To avoid the trigger can be locked in the open position
is necessary to remove the pin (1).
4
836 829 R. 07/19
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
AUTOMATIC
NOZZLE
QUARTER TURN
MANUAL NOZZLE