Idiomas disponibles
Idiomas disponibles
STEP 10
• Insert three WOOD DOWENL (C) into the holes in the SMALL BACK (3 and 4) and small
upright (5).
• Fasten the top (1) to the unit. Use two HIDDEN CAM (A) and four 1-1/2" LARGE HEAD
SCREW (H)
!
When assembling the components, be sure to check whether the hole is consistent
with the corresponding position on the manual. If you need any help, please feel free
to contact us via [email protected].
A.
HIDDEN CAM - 2
H
4
H
C
. WOOD DOWEL - 3
13
H.
1-1/2" LARGE HEAD SCREW - 4
H
H
3
5
C
C
1
C
1
2
The arrow must
3
point toward the
degeof the board.
STEP 11
• Insert four HIDDEN CAM(A) into the SMALL BACK (3 and 4). Tighten HIDDEN CAMS.
• Fasten the BACK (13) to your unit using the NAILS (J).
The arrow must point toward the dege of the board.
!
When assembling the components, be sure to check whether the hole is consistent
with the corresponding position on the manual. If you need any help, please feel free
to contact us via [email protected].
A.
HIDDEN CAM - 4
J.
3/4" NALL - 32
13
1
2
The arrow must
3
point toward the
dege of the board.
14
