Rowenta PRECISION VALET IS9100D1 Manual De Instrucciones página 3

- This appliance is not intended for use by or near children and other persons whose
physical, sensory or mental capabilities or lack of experience and knowledge prevents
them from using the appliance safely without supervision or instruction by a respon-
sible person to ensure that they can use the appliance safely.
- Children should be supervised by the responsible person to ensure that they do not
play with the appliance.
- Burns could occur from touching hot metal parts, hot water or steam. Use care when
you empty a steam appliance, there may be hot water in the tank.
- Pour water in water tank only.
- Never drop or insert any object into any opening or hose.
- lways keep the hose and nozzle elevated above the water tank.
- Steam only in an up and down vertical motion. Never use steamer in a horizontal
position or tilt into a backward position, this may result in hot water discharge.
- Do not place the steam nozzle directly on any surface or the appliance power cord
while it is hot or plugged in. Use the stand provided.
- When changing attachments, please be sure the unit is off and no steam is being
released to avoid contact with hot water.
- Use caution when changing attachments, as they may contain hot water from
condensation. Ensure the attachments are cooled off to avoid contact with hot water.
- The use of accessory attachments other than those provided by Rowenta is not
recommended and may result in fire, electric shock or personal injury.
- This unit is for indoor use only.
- To avoid a circuit overload, do not operate another high wattage appliance on the
same circuit.
If an extension cord is absolutely necessary, a 15-amp rated cord should be used.
Cords rated for less amperage may overheat. Care should be taken to arrange the cord
so that it cannot be pulled or tripped over.
S VE THESE INSTRUCTIONS
ENVIRONMENT L PROTECTION FIRST!
Your appliance contains valuable materials which can be recovered or recy-
cled.
‹ When disposing of it, take it to a collection point or an approved service
center.tt
ssembly :
Preparation:
• Place the base on the floor and remove the water tank.
Install pole in main unit:
• Insert pole 1 and 2 according to the diagram to the right,
ensuring the marks on the unit and the poles line up.
• Press pole firmly into place.
Locking the pole :
• With the poles inserted lay the base on its side.
• Turn the 2 lockbars on the base of the steamer 90° to
secure the poles.
Use a coin or similar object to turn the lockbar.
• fter the poles are locked, pick up the unit and return to
its use position.
Installing Integrated Hanger :
• Take the hanger with the brush hooks facing to the front.
• Check for correct orientation with the index marks mat-
ching.
• Insert both ends of the hanger into the pole connection
and press both ends simultaneously into the pole until
the hanger properly engages.
• If it is required to dismantle the pole from the main unit,
tilt the appliance and unlock the pole first.
• Then place the appliance back into it's upright position.
Expand both poles to the desired height by unlocking
them, pulling them gently and locking them. Warning :
Unlock the four clips while keeping integrated hanger in
your hand.
• Dismantling of the hanger from the poles by the custo-
mer is not foreseen.
SPECI L INSTRUCTIONS
3
EN
E
FR
NL
IT
ES
PT
Pole 1 SV
Pole 2
EL
TR
RU
UK
PL