How To Wire Your Ceiling Fan - Fanimation Zonix FP4640B Serie Manual Del Usuario

Ventilador de techo

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

WARNING

To avoid possible electrical shock, be sure electricity

is turned off at the main fuse box before wiring.

(Figure 1)

NOTE: If you are not sure if the outlet box is grounded,

contact a licensed electrician for advice, as it must be

grounded for safe operation.

Option A

Connect the green grounding lead from the

downrod and the green grounding lead from the

hanger bracket to the supply grounding conductor

(this may be a bare wire or wire with green colored

insulation). Securely connect wires with wire

connector. Securely connect the white fan motor wire

to the white supply (neutral) wire using wire connector.

Securely connect the black fan motor wire and blue

wire to the black supply wire using wire connector.

(Figure 2A)

NOTE: If you feel that you do not have enough

electrical wiring knowledge or experience, have your

fan installed by a licensed electrician.

WARNING

Check to see that all connections are tight, including

ground, and that no bare wire is visible at the wire

connectors except for the ground wire. Do not operate

fan until the blades are in place. Noise and motor

damage could result.

After connections have been made, taking care not

to pinch the wires and put the white and green leads

to one side and the black leads towards the other side,

the connection should be turned upward and carefully

push leads into the outlet box. The wires should be

spread apart with the grounded conductor and the

equipment-grounding conductor on one side of the

outlet box and the ungrounded conductor on the other

side. (Figure 3A)