Led Indicators; Installation Steps - Air Live WL-5450AP Guia De Inicio Rapido

LED Indicators

LED Indicator
Power
Status
Link/Act.
WEP/WPA
MAC Ctrl
Bridge / Repeater
LAN 1
LAN 2

Installation Steps

1. Please install your network cards first before the AP
2. Screw-in the antenna (clockwise) into the Antenna connector
3. Connect the power and LAN cable to the back
4. Use your wireless card to do a site survey, the default SSID is airlive and Channel is 11
5. If you need to change AP's configuration, please follow the procedure below:
English
4
Color
Solid
Turns solid green when power is applied to this
Green
device.
Turns solid red when the device is booting, after
Red
boot successfully, the light turn off.
Turns solid green when connected and associated
Green
to at least a client station.
Turns solid orange when wireless security is
Orange
enabled.
Orange Turns solid orange when MAC Control is enabled.
Turn solid orange when Bridge or Repeater is
Orange
enabled.
Turns solid green when linked to a local network.
Green
Status
Flashing
N/A.
Receiving/
Sending data
N/A
N/A
N/A
Receiving/
Sending data
WL-5450AP