Idiomas disponibles
Idiomas disponibles
®
Preparing the PS3
wireless controller
• Make sure that the 4xAAA batteries were put into the controller according to the indicated polarity.
Connecting the controller to the PS3
• Insert the USB connector into a PS3
®
• Turn the PS3
on, you will notice a LED on the USB connector begin to flash.
• Switch on the controller by the on/off switch located next to the battery compartment. You will notice
that the flashing LED on the USB connector will turn on permanently.
• Press the "PS" button on the controller.
• The controller is now connected and the light indicates which player the controller is assigned to.
• The controller equipped with a sleeping function. In searching mode, it will in sleep mode if no
connection made within 30 seconds. In connection mode, it will in sleep mode if the controller is in
idle for 5 minutes. Press the MENU button to re-activate.
Using the wireless controller
• The control functions of the wireless controller are similar to the functions of an original PS3
SIXAXIS controller.
Safety precautions:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
from mains and other equipment if a problem should occur. Do not expose the product to water or
moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of their respective
holders and are hereby recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products
should not be mixed with general household waste. There is a separate collections system
for these products.
ENGLISH
®
®
USB slot.
To reduce risk of electric shock, this product should ONLY be opened by
an authorized technician when service is required. Disconnect the product
2
®
