marklin Merkur Manual Del Usuario página 14

Replacing a Defective Light Bulb
The light bulb is available under item no. 113579 at
your authorized dealer.
Lift the body off with a flat-blade screwdriver at the 3
openings in the floor on both sides of the car. Caution:
Do not damage the wire from the light diffuser to the
coupler. Leave the interior details piece on the car floor.
Unsolder the wire at the light diffuser. Pull down the
contact bracket with a flat screwdriver at Point „g",
then unsnap it at Projection „h". Then, carefully lift the
contact bracket at Point „g" and loosen from the pin
at Point „g" on the interior detail piece. The contact
14
bracket can now be removed completely. Loosen the
second contact bracket on the same side of the car in
the same manner. The light diffuser can be removed
from the interior detail piece. Remove the silver film and
the adhesive film in the center of the light diffuser, and
replace the light bulb. Apply new adhesive filmand then
siver film. Insert the light diffuser between the contact
brackets on one side of the car and the interior detail
piece. Make sure that the Hole „c" in the light diffuser
comes on the Pin „b" on the interior detail piece and
that the arched side of the light diffuser faces up.
3.