Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Table of Contents
Table of Contents .......................................................... 2
Safety Information ......................................................... 2
Warranty ......................................................................... 3
Pre-Installation .............................................................. 3
Installation ..................................................................... 6
Safety Information
1.
To reduce the risk of electric shock, ensure the
electricity has been turned off at the circuit breaker or
fuse box before you begin.
2.
All wiring must be in accordance with the National
Electrical Code ANSI/NFPA 70-1999 and local electrical
codes. Electrical installation should be performed by a
quali ed licensed electrician.
3.
The outlet box and support structure must be securely
mounted and capable of reliably supporting a minimum
of 50 lbs. (22.7kg). Use only UL-listed outlet boxes marked
"For Fan Support."
4.
The fan must be mounted with a minimum of 7 ft (2 m) of
clearance from the trailing edge of the blades to the
oor.
5.
Do not place objects in the path of the blades.
6.
To avoid personal injury or damage to the fan and other
items, use caution when working around or cleaning the
fan.
7.
After making electrical connections, spliced conductors
should be turned upward and pushed carefully up into the
outlet box. The wires should be spread apart with the
grounded conductor and the equipment-grounding
conductor on one side of the outlet box.
8.
All setscrews must be checked and retightened where
necessary before installation.
Assembly ....................................................................... 7
Operation .................................................................... 12
Care and Cleaning ...................................................... 13
Troubleshooting .......................................................... 14
WARNING: To reduce the risk of personal injury,
do not bend the blade brackets (also referred to as
anges) during assembly or after installation. Do not
insert objects in the path of the blades.
WARNING: To reduce the risk of re or electric
shock, do not use this fan with any solid-state speed
control device.
WARNING: To avoid possible electrical shock,
turn the electricity off at the main fuse box before
wiring. If you feel you do not have enough electrical
wiring knowledge or experience, contact a licensed
electrician
WARNING: Electrical diagrams are for reference
only. If you are using a light kit, refer to the light kit
instructions manual to make the electrical
connections. Optional use of any light kit shall be
UL-listed and marked suitable for use with this fan.
WARNING: To reduce the risk of re or electric
shock, this fan should only be used with fan speed
control part no. MR77A, manufactured by Chungear
Industrial Co., Ltd.
CAUTION: To reduce the risk of personal injury,
use only the screws provided with the outlet box.
2
Capítulos
Tabla de contenido
Solución de problemas
