Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Assembly – Attaching the Accessories
9
Attaching the switch cup adaptor
Remove one screw from the black bracket below the fan
motor assembly (D). Loosen, but do not remove the other
two screws.
Align the key hole slots in the switch cup adaptor (H) with
the two screws in the black bracket.
Turn the switch cup adaptor (H) clockwise until the two
screws are situated in the narrow end of the keyholes.
Re-install the one screw that was removed in rst step.
Tighten all three screws rmly.
D
H
10
Attaching the switch cup
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
switch cup.
Remove one screw from the switch cup adaptor (H).
Loosen but do not remove the other two screws.
Connect the molded adaptor plug of the receiver (NN) in the
switch cup (E) with the molded adaptor of the fan motor
assembly (D).
Aligning the "L" shape holes on the switch cup (E) with the
screws on the switch cup adaptor (H). Turn the switch cup
(E) to hold it in position.
Install the other screw that was removed in the rst step.
Tighten all 3 screws securely.
H
l P
a e
e s
o c
1 1
NN
E
H
A
M
t n
c a
1 t
8 -
7 7
5 -
7 2
0 -
1 3
f 3
r o
u f
t r
P
O T
N
B
Y A
C .
O
M
e h
a r
s s
s i
a t
c n
. e
Capítulos
Tabla de contenido
Solución de problemas
