Start,Set Up And Sensor Pairing - meilan BLADE Guía De Usuario Rápida

Start,Set up and Sensor Pairing

1.If you don't want to set in BLADE device, you can short press
directly and exit the se ng menu; Connect the BLADE with APP and then set it
directly in the App. We suggest you to set our BLADE in App. If you set it by
App, you can neglect the set and paring process as below.
2. When you first me use BLADE, you need to set it; Short press the se ng
bu on behind to enter into se ng menu
previous step; press
I. Time Se ng (Image B)
II. Unit Op ons: Metrics Km; Imperial Unit: Mile(Image C)
III. ODO Se ng (Image D)
IV. Weight Se ng (Image E )
Hour/Minute (24 Hours Standard)
Hour/Minute
(24-Hour Clock)
MONTH
B
Ⅴ
.Pairing with sensors
①First, make sure that the sensor ba ery you want to connect with BLADE is
in normal opera on state and the installa on posi on / wearing is correct
way; Ride for 2-3 circles for a short me to ensure that these sensors have
been ac vated in opera on state. All sensors are set with power saving mode.
When it is in non-opera on state, it will enter into sleep mode automa cally
in 3 minutes;Users must move it up and down as to ac vate it again; Some
power meters need to be pedaled to ac vate.
-06-
to change data; and press
DAY
YEAR
C
;press
SETTING
to select next item.
D
key
SETTING
back to the
WGT
E