meilan BLADE Guía De Usuario Rápida página 5

*Note on Installment:

I.Core center of cadence and Wheel magnet
must be aligned with very part of the sensor;
There is one small triangle in the counterpart
of cadence magnet and speed magnet. If it is
not installed right way, it is probably the data
gets down to 0 when it exceeds from 40-60
always.
II.The distance between magnet and the senor can not exceed 2CM.If
exceeded, the device probably can't get the rota ng signal. Can use
screw driver to loose the screws and adjust the distance between
sensor and magnet. There are some race bike, road bikes and indoor
training device with special design, which are not fit for this installa on;
Please take it into considera on before purchase.
III. The sensor and the magnet must be assured with strong and steady
installment so that there is no drop or devia on
-04-
Speed Sensor
Cadence Sensor
Induc on
Induc on