Idiomas disponibles
Idiomas disponibles
Assembly Instructions
STEP 7
Make sure the distances from
metal frame to all top panel edges
are distributed evenly.
STEP 8
Pull the lever to adjust the height up or down.
To lower height, pull the lever while pushing the
center of table top down to desired height.
COMPLETED ASSEMBLY
CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY.
SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!
IMPORTANT NOTE:
• Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
• Check to be sure that you have all parts and hardware.
• Remove all wrapping materials, including staples and packing straps before you start to assemble.
• Don't tighten all screws/bolts until all completely assembled.
• Keep all hardware parts out of reach of children.
• It is recommended for 2 persons to complete this assembly.
A
B
Use "B" to connect the top panel.
99551/59605/59606/59634/59635/59636/16202/59611/59612
Connect the frame to top panel by 16pcs "A" screws.
A
X 16
B
X 3
G
X 3
H
X 3
60" Pneumatic
Height Adjustable Desk
G
Use "H" to connect the wire
to the top panel through "G".
( ≤ 33 lbs
≤15kg)
Two people are required to
assemble and move this model.
H
