Assembling Instructions; Scope Of Delivery; Operation; Switching On And Off - Deltafox DG-EHT 6860 3D Traducción Del Manual De Instrucciones Origina

GB
9 Strain relief
10 5-way adjustable handgrip
11 Power cable
12 Blade protection
13 Clippings collector
14 Mounting screws
for clippings collector

Assembling instructions

Always remove the mains plug
before carrying out any mainte-
nance work on the device.
Use only original parts.

Scope of delivery

Carefully unpack the appliance and check
that it is complete:
- Electric hedge trimmer
- Clippings collector
- Blade guard
- Instruction Manual

Operation

Do not use the equipment with-
out the hand guard. Wear suit-
able clothing and work gloves
when working with the equip-
ment. Ensure that the equipment
is functional before each use.
The On/Off switch and the safety
switch must not be held closed.
They must switch off the motor
when on is released. Should a
switch be damaged, stop work-
ing with the equipment. Ensure
that the mains voltage value
matches the label on the equip-
ment.
58
Note noise protection and local
specifications. The use of the
equipment on certain days (e.g.
Sundays and national holidays), at
certain times of day (lunch times,
night time quiet periods) or in spe-
cial areas (e.g. health resorts, clin-
ics etc.) is restricted or forbidden.
The blades continue to move for
a while after the equipment is
switched off. Allow the blades to
come to a complete standstill.
Do not touch the moving blades
and do not brake them. Risk of
injury!

Switching On and Off

1. For tension relief of the cable, form a
loop of the end of the extension cable
and bring this through the opening at
the handle (10) and suspend in the
tension relief at the grip (9).
2. Connect the device to the mains volt-
age.
Ensure that you are standing in a
firm position with both hands grip-
ping the hedge trimmer away from
the body. Ensure that the trimmer
is in contact with no other objects
before switching on.
3. Hold the safety switch on the loop
handle (4) and push the On/Off switch
on the grip (8) at the same time to
switch the unit on. The hedge trimmer
will be run at maximum speed.
4. Release one of the two switches to
switch the trimmer off.
The braking effect can cause the
formation of sparks in the area