Always close the lid before each operation
Put the appliance on stable shelves and floors.
Do not insert any metal object into the product. Remove
the whisk, only after having turned off the appliance and
unplugged it from the main power outlet.
To avoid milk to stuck on container, at the end of each
use, immediately rinse the container with water.
DESCRIPTION G10146
1 Lid
3 Handle and Main body
OPERATING THE UNIT
-
Pour the milk into the container, making sure to stay within the limits of the capacity which is indicated
on the appliance itself (MIN - MAX). There are 2 MAX indications inside the container: the lower one
indicates the maximum level if you want to froth milk (200 ml); the upper one shows the maximum
operation level if you just want to heat milk (350 ml).
-
WARNING: if you exceed the maximum specified levels, the milk will spill out during use.
-
Press 2 times the button
will begin to rotate. Once finished, the appliance will turn off automatically.
-
Press the button
and the whisk will begin to rotate. Once finished, the product will automatically turn off.
-
If you only want to heat the milk, remove the whisk from the base of the container. WARNING: this
operation can be performed only if the product is switched off and unplugged from the power supply and
when all the parts are completely cold. To heat the milk, press one time the button
appliance turns off automatically. The light of the button will turn on in red.
-
You can stop the machine anytime, by simply pressing again the operation button (4).
To avoid milk to stuck on container, at the end of each use, immediately rinse the container with water.
CLEANING -
Unplug the unit and wait until the complete cooling down of each part before
starting cleaning operations.
Do not immerse the base of the vessel and into the water. In any case, avoid splashing water or other liquids
from reaching those parts. Do not use abrasive cleaners, solvents, or strong detergents to clean the exterior
and the base of the product, but clean with a cloth dampened with warm water. To clean the inside of the
appliance, wait for the cooling and rinse with cold water to remove residues and impurities.
To avoid the milk to stuck on container, at the end of each use, immediately rinse container with water.
SAFETY SWITCH-OFF
The safety device is triggered if the appliance operates without any milk inside the container. To avoid
overheating, the unit is automatically turned off after a few seconds and it cannot be activated until the
complete cooling of the electric resistance.
TECHNICAL FEATURES
•
Power supply: AC 230V~50-60Hz. Power 500W
•
Max. capacity 350 ml
•
Control button with function lights
•
Removable whisk for an easy cleaning
2 Whisk
4 Operation buttons
to heat and froth milk. The light of the button will turn on red, and the whisk
to froth fresh milk, without heating it. The light of the button will turn on in blue,
5 Electric base
and wait until the
10