Frequently Asked Questions; Technical Data; Optional Accessories - Marmitek GIGACONTROL 450 Modo De Empleo

• Some satellite receivers must be placed closer to the GigaControl450™ as a result of the
effect the two devices have on one another. Try the Transmitter at a range of locations in
order to obtain the best range.

5. FREQUENTLY ASKED QUESTIONS

• In a few cases, the Receiver may be disrupted by interference and cannot, therefore, pick
up the signals it receives. If this is the case the red light will be continuously illuminated and
the Receiver must be relocated. This interference is caused by equipment in the vicinity such
as dimmers, energy-saving light bulbs, IR alarms and so on. Direct sunlight can also disrupt
the Receiver.
• GigaControl450™ does not work with remote controls which use High Frequency signals
(such as B&O)
Do you have other questions that have not been resolved by the above information?
Please go to www.marmitek.com

6. TECHNICAL DATA

Range:
Power:
Frequency:
Dimensions:
Frequency range:
IR reception range:

7. OPTIONAL ACCESSORIES

IR EYE (Art. no. 09682)
The IR Eye extends the IR signal of your remote control in combination with the GigaControl450™.
Using the infrared extender, you can operate your A/V equipment even when it is in a closed
cupboard, out of sight or in another room.
For more information, checkout www.marmitek.com
GC450 Extra IR receiver (Art. nr. 08033 / 08034)
With the help of an extra IR Receiver you can also control your A/V equipment from another
place.
GigaControl450™
Up to 100m free field, up to 25m through walls and ceilings
100 - 240 VAC 50/60 Hz
433.92 MHz
77 x 38 mm
30-60 KHz.
± 10 metres
5