Program Mode - E-Bench KH 969 Manual De Instrucciones

KH969_BA_D*F*NL*GR... 06.03.2003
• Skipping tracks and search mode
1. If during play or pause mode the cd skip forward button ">>" (7) or cd skip backward button "<<" (8) is pressed once, then the next
or last track respectively will be played.
2. If during play mode the cd skip forward button ">>" (7) or cd skip backward button "<<" (8) is pressed and held down, the unit will search
forwards or backwards for the track (or within the track) with an audible increase in speed.

• Program mode

1. By pressing the program button (9) once in CD STOP MODE, the program led display (16) lights up. With the cd skip forward button ">>" (7)
or cd skip backward button "<<" (8) go to the track you want. The cd led display (13) shows the number of the track currently being played.
Then press the program button (9) once more to store the desired title.
2. Repeat the steps above until all the tracks you want are stored. You can store a total of 20 tracks.
3. Press the cd play/pause button (12) once to play the PROGRAMMED track.
4. To erase the PROGRAMMED tracks, just open the cd door (4).
Stereo headphones jack
To listen to the music using the headphones insert the stereo headphone plug into the stereo headphones jack (28) and adjust the volume
to suit. During use of the headphones the speakers are automatically switched off.
Recording from the CD
1. Set the function control switch (1) to the "CD" position.
2. Insert the CD with the label uppermost into the CD compartment.
3. Insert a cassette into the cassette compartment (19) and press the cassette deck pause button (25).
4. The unit will record when the record button (20) and the play button (21) are pressed down simultaneously. The unit is automatically set
for the best recording quality by the integral ALC facility.
5. Starts the CD and go to the desired TRACK (see CD PLAYER). Release the cassette deck pause button (25) to start recording.
6. To interrupt recording temporarily press the pause button (25). Press the pause button (25) again to continue recording.
7. To stop recording press the cassette deck stop/reject button (24). Finally stop the CD playing by pressing the CD player's cd stop button (11).
12:13 Uhr Seite 15
GB
15