Cleaning And Maintenance - IRIS IC-SB1U Serie Manual De Instrucciones

HOW TO USE
How to Store
When the product is not in use for an extended period of time, cover the
unit with a plastic bag, etc ., and then store it in a dry location away from
direct sunlight .
After use, please store the power cord using the cord hooks .
1 Wrap the power cord around the cord hooks on the back of the
main body.
Make sure the top cord hook faces up, as shown on the right .
2 Insert the power cord into the cord holder. The part of the cord
placed in the cord holder should be near the power plug.
If wound too loosely or too tightly, the cord will not fit correctly into the
cord holder . Please rewind the power cord so that it fits properly .
When using the vacuum, change the direction of top of the cord hook
as shown in the figure below . This will make it easier to remove the
power cord .
Main body
Protection Mode
If you continue to use product without emptying the dust cup and cleaning the filter, protection mode will activate to prevent
overheating of the motor . The operation light blinks even if the power is turned on . The vacuum motor will temporarily shut
down .
Solution:
1 . Turn off the vacuum . Unplug from the outlet .
2 . Replace dust bag and clean the sponge filter .
3 . Place in a cool location .
After about an hour, protection mode will be unlocked and product can be used again .
Problems that could not be resolved . Please contact the dealer of purchase or IRIS USA, Inc . customer service .
Cord hook
(top)
Power cord
Cord holder
Cord hook
(bottom)
Remove
Power plug
Cord hook
(top)
Power cord
9

CLEANING AND MAINTENANCE

Please do not splash water on the vacuum as this could cause damage or electric shock .
Use a diluted neutral cleaning agent .
WARNING
Use of strong cleaning agents such as amylacetic ester, alcohol, oil, etc . can cause fading,
deformation, or breakdown .
Unplug the power plug from the electric socket before cleaning .
Main Body and Extension Pipe
Fully wring out a rag and use it wipe down the body .
Please wipe thoroughly after using a neutral detergent .
Collection Head
Clean hair, string and other small objects from back of the
collection head (marked with a circle in the image) using
tweezers .
Remove dust clogged in the pipe with a stick .
Soak the cloth in water with diluted neutral cleaning
agent, and fully wring out the cloth and use it to wipe
down the surface .
Bag Holder, Dust Cover
Rinse the bag holder and dust cover with running water .
After rinsing the bag holder and dust
WARNING
cover, place these in a well-ventilated
area or shade until fully dry .
Rinse
10