Charging; Operation | 09 - Gioteck EX-01 Manual De Instrucciones

charging your headset
The headset contains a rechargeable Li-ion polymer battery. Prior to using the headset for the first time, it is
strongly recommended to fully charge the battery for 3 hours.
Connect the USB cable to your PS3™ [01] and the mini usb [02] to the headset's charging socket [03]. The LED
will illuminate green during the charging process and will be off when fully charged. NOTE: Charging indication will
be delayed for a few minutes if the headset has not been used for a long time.
charging time
Normally the battery is fully recharged
within 3 hours. As soon as the battery is
fully charged, the LED will be off or a
weak Green. Disconnect the USB cable
from the PS3™ and the headset.
Do not try
to pair the
headset to
the console,
when the
headset is
charging. If it
02
is charging,
it will not pair
to the PS3™.

08 | CHARGING

game time
The fully charged battery offers up to
4 hours continuous use. It is advisable to
always recharge after lengthy gameplay
so the headset is fully charged for the
next round.
01
03
operating your headset
1. To power on your headset, press and hold the power button for 1 second until the LED flashes Blue.
NOTE: If the LED flashes Green only, the battery will need to be charged.
2. To fit your headset comfortably, lift the earhook and loop it around your ear. Position the speaker in your ear
for optimal audio performance.
3. To power off your headset, press and hold the power button for 3 seconds until the LED flashes Green.
adjusting volume muting
Tap the + button to increase the volume Press the power button briefly
in increments until the headset reaches (less than 1 second) repeat the
your desired volume level. process to un-mute.
Tap the - button to decrease the volume
in increments until the headset reaches
your desired volume level.
To reconnect
the headset
02
to your PS3™
at any time,
press the
power button.
VOLUME INCREASE
01
VOLUME DECREASE
POWER /MUTE / RECONNECT

OPERATION | 09