28
XENYX CONTROL2USB
Specifi cations
Frequency Response
Line-level inputs and outputs
¼ " jack, balanced or unbalanced
Phono input
Distortion (THD & IMD)
Line-level inputs to line-level outputs (unity gain)
Phono input
Noise Floor
Unity gain with Input 1, 2 and 3 assigned
Monitor A, B and C outputs, studio output, DAW, 2-track A & B outputs
Phono input
Equivalent input noise (E.I.N.)
Dynamic Range
Line inputs
Phono input
Crosstalk
Adjacent inputs
Left to right / right to left
Muted / level off
Control Range
Input level
Output level
Dim switch
Rated Input Voltage
Line inputs (+4 dB level setting)
Line inputs (-10 dB level setting)
Phono input @ 1 kHz, nominal gain
Rated Output Voltage
All line-level outputs (+4 dB level setting)
All line-level outputs (-10 dB level setting)
Maximum Voltage Gain
Input 1, 2 and 3 to:
Monitor A, B and C outputs
DAW, 2-track A & B, and phones (rear) outputs
Studio output
Phones 1 & 2 outputs
Monitor mix input to:
Phones (rear) outputs
Studio output
Phones 1 & 2 outputs
Phono input @ 1 kHz to:
Monitor A, B and C outputs
DAW, 2-track A & B, and phones (rear) outputs
Studio output
Phones 1 & 2 outputs
Input Impedance
Line input
Phono input
Output Impedance
Line output
Headphone output
10 Hz to 40 kHz (+0 dB / -1 dB)
20 Hz to 20 kHz (±1 dB)
<0.02 %, 20 Hz to 20 kHz @ +4 dBu
<0.10 %, 20 Hz to 20 kHz @ +4 dBu
-86 dBu, 20 Hz to 20 kHz
-90 dBu, 20 Hz to 20 kHz
-75 dBu, 20 Hz to 20 kHz
-119 dBu, 20 Hz to 20 kHz
107 dB
88 dB
95 dB @ 1 kHz
85 dB @ 1 kHz
95 dB @ 1 kHz
±10 dB
-12 dB to 0 dB
0 dB / -20 dB
+4 dBu / +30 dBu (nominal / maximum)
-10 dBu / +15 dBu (nominal / maximum)
5 mV / 90 mV (nominal / maximum)
+4 dBu / +21 dBu (nominal / maximum)
-10 dBu / +8 dBu (nominal / maximum)
+32 dB
+22 dB
32 dB
32 dB (output loaded @ 100 kΩ)
12 dB
22 dB
22 dB (output loaded @ 100 kΩ)
65 dB
55 dB
66 dB
66 dB (output loaded @ 100 kΩ)
20 kΩ balanced / 14 kΩ unbalanced
40 kΩ
200 Ω balanced / 100 Ω unbalanced
50 Ω
Input/Output VU Meters
12-segment LED
Talkback Section
Automatic gain control (AGC)
Nominal output level
Output level range
Power Supply / Voltage (Fuses)
Mains voltage
Fuse
Power consumption
Mains connection
USB
Audio
Connector
Sample rate
Dimensions/Weight
Dimensions (H x W x D)
Weight
Quick Start Guide
CLIP, +10, +7, +4, +2, 0, -2, -4, -7, -10, -20, -30 dB
Yes
+4 dBu (+4 dB output level setting)
-∞ to +10 dB
100-240 V~, 50/60 Hz
T 1AH 250 V
15 W
Standard IEC receptacle
Stereo in / out
Type B
44.1 / 48 kHz
87 x 389 x 198 mm (3.4 x 15.3 x 7.8")
2.4 kg (5.3 lbs)
29
