Device Controls And Indicators; Storage, Handling And Removal Instructions; Storage And Handling; Removal Instruction - AMATECH Skytron Manual Del Usuario

INSTRUCTIONS FOR USE
To adjust the
c.
angulation SIMPLY LIFT UP ON THE END
OF THE BOARD and move it in the
desired direction. Lower the end of the
Armboard and the weight of the arm
will lock the board in position. Do not
apply excessive force when lifting the
end of the Armboard. Only 2-3lbs (0.9-
1.4 kg) of such force should be required
to disengage the lock mechanism
during repositioning. Extreme upward
forces could damage the Armboard.
Be careful not to install the armboard at a table section articulation level. the
armboard could be damaged in case of movement.

Device controls and indicators:

Controls and indicators of this device are described within the Setup instructions.

Storage, Handling and Removal Instructions:

3.4.1

Storage and Handling:

The product should be stored in a clean and safe environment to prevent product
damage.
3.4.2

Removal Instruction:

a. Grasp the end of the Armboard with one hand. With the other hand lift the
latch handle.
b. Lift the end of the board up and pull the Armboard away from the rail.

Troubleshooting Guide:

This device does not have a troubleshooting guide. For technical support users of
the device shall first contact their supplier.
Document Number: D-720340
Version: C
Armboards radial
Page 13
Issue Date: 18 MAR 2020
Ref Blank Template: 80025118 Ver. E