ZTE MF20E Manual De Usuario página 62

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

 Network Name (SSID): The name of the wireless network service provided by the
CPE. Clients that want to connect to the network must set their SSID to the same
as that of the adaptor.
 BSSID: The identifier (MAC address) of the adaptor in the Basic Service Set (BSS)
network.
 Frequency (Channel): The radio channel that the adaptor uses to communicate
with wireless clients. Choose the appropriate channel to optimize the performance
and coverage of your wireless network.
 Operating Mode: In Mixed Mode, packets are transmitted with a preamble
compatible with the legacy 802.11a/g, the rest of the packet has a new format. In
Green Field, high throughput packets are transmitted without a legacy compatible
part.
 Channel Bandwidth: Set the HT physical channel bandwidth.
Guard Interval: The guard interval between symbols helps receivers overcome the
effects of multipath delays. When you add a guard time, the back portion of useful
signal time is copied and appended to the front. (Default: Auto)
MCS: The Modulation and Coding Scheme (MCS) is a value that determines the
modulation, coding and number of spatial channels.
Reverse Direction Grant (RDG): When Reverse Direction Grant is enabled, the
adaptor can reduce the transmitted data packet collision by using the reverse
direction protocol.
 Extension Channel: Set extension channel. When 20/40MHz channel bandwidth
has been set, the extension channel option will be enabled.
 Space Time Block Coding (STBC): Enable Space Time Block Coding or not.
 Aggregation MSDU (A-MSDU): To enable Hyper Throughput TX Aggregate MAC
Service Data Unit, select Enable.
 Auto Block ACK: Select to block ACK (Acknowledge Number) or not during data
transferring.
 Decline BA Request: Select to reject peer BA-Request or not.
 Disallow TKIP: Enable Disallow TKIP or not.
 20/40 Coexistence: Enable 20/40 Coexistence or not.
 HT TxStreem: The number of HT TxStream means how many antennas will
transmit data simultaneously. (Options: 1 or 2. Default: 2)
 HT RXStreem: The number of HT RxStream means how many antennas will
receive data simultaneously. (Options: 1 or 2. Default: 2)
Click Apply to confirm your configuration.
Tabla de contenido
loading

Tabla de contenido