Head Location - J.P. SELECTA MACROFRIGER-BLT GR-50T Manual De Instrucciones

INSTRUCTION MANUAL
J
.P. SELECTA s.a.u.
CODE 80343 REV A

5.5 Head location

Before placing the swing out rotor, check that the locking ring wedge is
in the right position.
Place the rotor on the spindle, ensuring that the keys and their lodgings
are perfectly aligned and that it fits perpendicular to the axis. The rotor
should slide easily, it is not necessary to use a mallet or hammer.
Place and screw the locking nut in place and tighten using the spanner
provided.
Tighten the Allen screws on the locking nut block.
Periodically examine the status of the rotor and the buckets to check and
detect possible corrosion, micro fractures and mechanical deformations.
Verify that the adapters and the extractor buckets freely rotate and can
perform the reciprocal movement without impediments.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: [email protected] - website: http://www.grupo-selecta.com
09/2021 Page: 24
Tel 34 937 700 877 Fax 34 937 702 362