Technical Data; Ec Declaration Of Conformity; Paper Shredder Primo 4001 - HSM Primo 4001 Instrucciones De Servicio

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35

10 Technical data

Cutting type
Shred size (mm)
Sa fe ty ra ting DIN 32757 – 1
Cutting ca pa ci ty ** (sheets), DIN A4 70 g/m
Cutting speed
Weight
Noise level (Idle running/ load)
Lo ading width
Voltage
Power for the maximum number of sheets
Dimensions W x D x H (mm)
Volume of shredded material bag
* HSM-specifi cation
** The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one specifi ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
The performance data in 80 g/m² is calculated.

EC Declaration of Conformity

The manufacturer HSM GmbH + Co. KG, Austraße 1 - 9, D-88699 Frickingen hereby declares that the machine,
referred to here as
document shredder Primo 4001
corresponds to the health and safety requirements of the following EC directives listed below due to its conception and
design of the version in which it was put into circulation by us:
Low voltage directive 2006 / 95 / EEC
EMC directive 2004 / 108 / EC
Applied standards and technical specifi cations:
• EN 55014-1:2006
• EN 55014-2:1997 + A1:2001 + A2:2008
• EN 61000-3-2:2006
• EN 61000-3-3:1995 + A1:2001 + A2:2005
• EN 13849-1:2008
• EN 62233:2008
• EN 60950-1:2006 + A11:2009 + A1:2010
Frickingen, 01.03.2011
Rolf Gasteier - Technical Director
18
Strip cut
5.8
3.9
2
65 - 67
48 - 50
2
80 g/m
51 - 53
38 - 40
2
100 mm/s
74 kg
60 dB(A) / 68 dB(A)
• EN 61000-4-2:1995 + A1:1998 + A2:2001
• EN 61000-4-4:2004
• EN 61000-4-5:2006
• EN 61000-4-6:2007
• EN 61000-4-11:2004
• EN 50366:2003 + A1:2006
Primo 4001
english
english
Cross cut
3.9 x 50
1.9 x 15
2
3
4
38 - 40
26 - 28
33 - 35
20 - 22
110 mm/s
60 dB(A) / 75 dB(A)
400 mm
230 V, 50 Hz
100 V, 50/60 Hz – 115 V, 60 Hz
2100 W
595 x 470 x 990
146 l
0.78x11
1 x 5
5
Level 6*
17 - 19
11 - 12
12 - 14
10
82 kg
09/2011
Tabla de contenido
loading

Tabla de contenido