eNet
Actuador regulador radioeléctrico de 1 elemento mini
Priority, twilight
Switch off brightness overs
hoot
Switch on brightness unders
hoot
Minimum brightness
Maximum brightness
32580702
10499446
0...4
Basic setting: 0
On, Off
Basic setting: On
On, Off
Basic setting: Off
1...67 %
Basic setting: 5 %
75...100 %
Basic setting: 100 %
12.03.2014
Specifies the priority for reca
lling and removing a scene of
type Twilight for the channel.
Allows automatic switchoff
according to the brightness. If
the parameter is On, then the
light controller switches off au
tomatically when the bright
ness setpoint is greatly excee
ded.
Note: This parameter is not
yet active, as a light controller
has not yet been implemen
ted.
Allows automatic switchon
according to the brightness. If
the parameter is On, then the
light controller switches on au
tomatically when the bright
ness setpoint is greatly un
dershot. We recommend only
using the parameter in con
nection with the parameter
"Switchoff on brightness
overshoot".
Note: This parameter is not
yet active, as a light controller
has not yet been implemen
ted.
Specifies the minimum setta
ble brightness.
Note: If parameters or scene
values are set to a level lower
than the minimum brightness,
then the system will dim to mi
nimum brightness.
Specifies the maximum setta
ble brightness.
Note: If parameters or scene
values are set to a level higher
than the maximum brightness,
then the system will dim to
maximum brightness.
11/15