König Electronic VID-TRANS545KN Manual De Uso página 4

Installing the camera:
1. The camera can be mounted to a wall. Fix the antenna to the
antenna connector. Monitor reception should be tested before
mounting the camera. If interference or other problems occur,
select another channel or different location to mount the
camera.
2. Connect the 9V/400mA, AC/DC adapter to the DC power
plug and a 230V wall outlet. The camera is switched on
automatically.
Installing the receiver:
1. Connect the receiver's AV OUTPUT with the AV cable to the
input of a monitor or TV
2. Fix the antenna to the antenna connector
3. Connect the plug of the 7.5V/300mA, AC/DC adapter to the
DC power input and a 230V wall outlet
4. Select the desired channel on both the camera and the receiver. For optimum
performance, it could be necessary to point the transmitter and receiver to each other
in an imaginary straight line. A few centimeters could already be enough to improve the
sound and picture quality. If the reception is perfect, no adjustments are necessary.
5. Turn on the TV or monitor to watch the images of the camera.
Option: connect a recording device for recording images to the REC output
Specifications:
Camera:
• Operating frequency:
• Image chip:
• Channels:
• Antenna:
• Power:
• Dimensions:
• Weight:
Receiver:
• Operating frequency:
• Channels:
• Output:
• Antenna:
• Power:
• Dimensions:
• Weight:
5.8 GHz
1/4" CMOS
4 with PLL frequency synthesizer
Omni directional
9V DC/400 mA
90x63x65 mm
230 g
5.8 GHz
4 with PLL frequency synthesizer
2x 3.5mm
Omni directional
7.5V DC/300 mA
90x74x20 mm
110 g
4