LEMAN LOPCL050 Manual De Instrucciones página 9

Maintenance and Cleaning:
- Perform regular maintenance to avoid appearance of undesirable problems.
- Do not use water, solvents or detergents nor abrasive or corrosive products to clean the machine: use a brush, a
lint-free damp cloth, a vacuum cleaner, or a blower.
- The LED can not be replaced.
- Perform a thorough cleaning after each use to avoid waste accumulation on the device. Immediate cleaning
prevents the formation of an agglomerate that it will be more difficult to remove later, and especially avoid the
appearance of corrosion.
- The unit must be kept clean to avoid premature deterioration and wear.
- Periodically, depending on frequency of use, check all screws and tighten them if necessary.
Transport of the machine:
- Unplug the appliance.
- Wait until the unit has completely cooled.
Storage:
- Unplug the power plug of the sector.
- Wait for the machine to cool completely before cleaning and then store it.
- Store the unit so that it can not be used by an unauthorized person.
- Store the machine so that no one can get hurt.
- Always store the device in a dry and protected
Do not dispose of electric tools together with household waste material!
In observance of European Directive on waste electrical and electronic equipment and its
implementation in accordance with national law, electric tools that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.
GB
DISPOSAL
9