Installation And Handling; Maintenance And Storage - LEMAN LOPCL050 Manual De Instrucciones

- Do not expose this device to rain or wet conditions. Water entering an electric tool will increase the risk of electric
shock.
- Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the device. Keep cord away from
heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
- Do not cover the device when switched on. The device heats up during operation and can burn the surface of the
skin.
- Warning against harmful light radiation. Do not look directly into the light beam! Do not look into the light
beam for long periods! Do not direct the light beam towards other people or animals!
- When operating this device outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
- Stay alert, watch what you are doing and use common sense when operating this device. Do not use this device
while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating
may result in serious personal injury.
- Disconnect the plug from the power source before making any adjustments, maintenance, cleaning, or storing
this device. Such preventive safety measures reduce the risk of starting the electric tool accidentally.
- Store this device out of the reach of children and do not allow persons unfamiliar with this device or these
instructions to operate.
- Use this device in accordance with these instructions, taking into account the working conditions and the work to
be performed. Use of this device for operations different from intended could result in a hazardous situation.
-
Have this device serviced by a qualified repair person using only identical replacement parts. This will ensure that
the safety of the device is maintained.
- If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order
to avoid a safety hazard.
- Do not disassemble or open the cover or the electric box. There are no user-serviceable parts inside the device.
Refer to an authorized dealer for service and/or spare parts.
Unpacking:
- Open the packaging and carefully remove the device and all its components.
- Check that the delivery is complete and well for any missing item.
- Check that the device and its accessories have not been damaged during transport.
- Keep the packaging as much as possible until the end of the warranty period.
Installation:
- Place the device on a flat, horizontal and hard surface.
- Leave space:
- At least 30 cm from each side of the device;
- At least 50 cm above the device;
- At least 1 meter in front of the device.
- If necessary, loosen the hinge bolts (4), tilt the lamp in the desired direction and tighten the 2 bolts.
Turning on the unit:
- Plug on the device.
As this device is not equipped with an On/Off switch, the light beam appears when you connect the power cord to
the mains outlet.
Switching off:
- Remove the mains plug.
As this device is not equipped with an On/Off switch, it is necessary to disconnect from the mains.
! Danger! Before any operation of maintenance or cleaning, disconnect the mains plug. The unit must in any case
be on.
! Danger! Risk of burns! Before any operation of maintenance or cleaning, wait until the unit has completely
cooled (approx. 30 minutes).
GB

INSTALLATION AND HANDLING

MAINTENANCE AND STORAGE

8