Cleaning And Maintenance; Uv Lamp Replacement - Concept CA1000 Manual De Instrucciones

EN

CLEANING AND MAINTENANCE

Clean the air purifier at least once a month, as well as the pre-filter, carbon filter and HEPA filter. You may need to
increase the frequency of cleaning demanding on the surrounding environment.
COMBINED FILTER
Clean the filters using a vacuum cleaner with a brush attachment attached. This removes the fibres and other dirt.
Front side (pre-filter and carbon filter) Rear side (HEPA filter)
NOTE:
• Only a pre-filter is washable. Make sure the pre-filter is dry prior to placing it in front of the combined filter.
• The combined filter works as a single filter system and it includes the following: pre-filter, carbon filter and HEPA
filter.

UV LAMP REPLACEMENT

1. Use a screwdriver to open the UV lamp cover.
2. Carefully release the UV lamp from the holder and disconnect from the connector.
3. Attach a new UV lamp to the connector and then secure it back into the holder.
Do not touch the glass part of the UV lamp, it may damage the lamp.
Note: Do not look directly into the UV lamp when it is on.
NOTICE
Wipe the outside of the appliance with a dry, soft, clean cloth.
NOTE: Do not insert fingers or any foreign objects inside the appliance.
WARNING Do NOT use gasoline, thinner, harsh detergents, etc. to clean the exterior or interior parts. You could damage
the appliance.
Never use alcohol or other solvents.
0 CA1000
37