ASROCK X570S PG Riptide Manual De Instrucciones página 37

Thunderbolt AIC
Connector
(5-pin TB1)
(see p.1, No. 28)
RGB LED Headers
(4-pin RGB_LED1)
(see p.1, No. 26)
(4-pin RGB_LED2)
(see p.1, No. 9)
Addressable LED Headers
(3-pin ADDR_LED1)
(see p.1, No. 25)
(3-pin ADDR_LED2)
(see p.1, No. 8)
Please connect a Thunderbolt™
add-in card (AIC) to the
Thunderbolt AIC connector via
the GPIO cable.
*Please install the Thunderbolt™
AIC card to PCIE3 (default
slot).
*For the further information,
please visit www.asrock.com.
These two RGB headers are used
1
to connect RGB LED extension
+12V G R B
cable which allows
users to choose from various LED
lighting effects.
Caution: Never install the RGB
LED cable in the wrong orienta-
tion; otherwise, the cable may
be damaged.
*Please refer to page 48 for
further instructions on these two
headers.
These two Addressable headers
1
are used to connect Addressable
GND
LED extension cable which
DO_ADDR
VOUT
allows users to choose from
various LED lighting effects.
Caution: Never install the
Addressable LED cable in the
wrong orientation; otherwise,
the cable may be damaged.
*Please refer to page 49 for
further instructions on this
header.
X570S PG Riptide
35