Correct Use Of The Product - POLTI cimex ERADICATOR Manual De Instrucciones

Ocultar thumbs Ver también para cimex ERADICATOR:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

CORRECT USE OF THE PRODUCT

This appliance is intended for home use as a
steam generator as described and in accor-
dance with the instructions provided in this
manual. Please read these instructions care-
fully and keep them, as you may find them
useful in the future.
POLTI DECLINES LIABILITY FOR ANY DAM-
AGE OR ACCIDENT DERIVED FROM ANY
USE OF THIS APPLIANCE WHICH IS NOT IN
CONFORMITY WITH THE INSTRUCTIONS
CONTAINED IN THIS BOOKLET.
IMPORTANT
Before leaving our factory all our products
are rigorously tested. For this reason, your Ci-
mex Eradicator may contain some residual
water in the boiler from the testing.
SET UP
Before using Cimex Eradicator for the first ti-
me assemble the pivoting wheels as indicated
in Fig. A.
HPMED
HPMed is a cleaning product for surfaces.
Contains <5% non-ionic surfactant.
Keep HPMed out of the reach of children. Do
not ingest. In case of contact with eyes, rinse
with plenty of water and seek medical advice.
HPMed is a detergent.
Adding it to the steam flow delivered by Ci-
mex Eradicator allows easier removal of eggs,
organic traces due to bedbug feces and the
complete elimination of the characteristic
bedbug odor from surfaces.
For any queries please visit www.polti.com.
INSTRUCTIONS FOR USE:
CIMEX ERADICATOR
• Remove the empty
bottle from Steam Di-
sinfector.
Simply
un-
screw it as shown.
Switch on the machine following the "Prepa-
ration For Use" section.
If you do not want to use HPMed
cleaning solution, keep inserted the empty
bottle (19) in the opening where the HPMed
bottle should go. When using the empty bot-
tle, do not insert the wick.
WARNINGS:
• Do not screw HPMed bottle to the gun
without the wick.
• If no consumption of HPMed is seen during
use of the product, this means that the stop-
per has not been inserted correctly, or has
folded within the bottle.
Unscrew the bottle and repeat the insertion
procedure, taking care to position it correctly.
• Do not refill the disposable bottle.
13
• Unscrew the cap of
the disposable bottle
(17).
• Insert the wick (18) in-
to the disposable bot-
tle, until it rests on the
base of the bottle.
• Ensure that the wick
stays as straight
possible.
• Screw the bottle into
Steam Disinfector, as
shown, taking care to
ensure that the wick
enters the hole inside
the
fitting
perfectly,
without bending.
as
Tabla de contenido
loading

Tabla de contenido