LeoVince 4251E Manual De Instrucciones página 10

Db-killer N°59
Cod.3014228801
100
LV ONE EVO
Øi 50X270 RHS
Cod.3014229481
2x Allen screw M6X16
T.C.E.I. Z.B.
Cod.204985
Aluminium spacer
ø27X8,5X11
Cod. 204321
Allen screw M8X25
T.C.E.I. Z.B.
Cod.200314
Super short helical spring
tensile
Cod.308574001
"OPTIONAL"
Cod.5683
4 Short helical spring
tensile
Cod.303949001
Pipe s.s. RHS N°2
Cod.3014030202
ART. 14252E
YAMAHA MT-07 / MT-07 TRACER / XSR 700 (also fit 35Kw versions)
FULL SYSTEM 2/1 - LV ONE EVO - CARBON
82
12
62
74
S.s. Bushing
S.s. Flange112A
Cod.204833
Cod.204569
S.s. bracket
Cod.3014251502
Cod.206528
2x Knurled collar nut
M6 Cod.200333
Knurled collar nut
M8 Cod.200298
2x S.s. Bushing
Carbon bracket FM1S
Cod.204833
Cod.306958505
Db-killer N°61
cod. 3014251801
Pipe 2/1
Cod.3014251205
2x S.s. Flange112A
Cod.204569
e.38
Pipe s.s. LHS N°1
Cod.3014030201
10
10. Check the tightening of nuts and bolts. Start the engine, wait a few minutes until
47
the correct running temperature has been reached and check there is no gas leakage.
33
11. If assembly has been correctly undertaken, the overall dimensions of the manifolds
should not interfere with the engine parts (radiator, cylinder block, fairings, etc.).
35
41
43
IMPORTANT:
During the first km of running, the exhaust system needs breaking-in; therefore, slight
gas leakage might occur. After approximately 100 Km, check all the fasteners.
ADJUSTEMENT:
This silencer has been developed by Leovince on an electronic dynamometer using a
vehicle in perfect condition, and in standard trim
MAINTENANCE:
From time to time, check all the brackets and fasteners, which could be affected by use
(sound-deadening material, seals and other rubber parts) and replace them periodically.
The silencer may be cleaned using gasoline, diesel oil or alcohol. Absolutely avoid the
use of any kind of solvent.It is normal for there to be some discolouration of the silencer,
which is the result of heat and the nature of the materials used.
IT IS FORBIDDEN to modify silencers. Whatever form this may take,
Belgrove Sp. z o.o. declines any responsibility for defects, problems, or malfunction,
arising from the use of any product which has been modified or tampered with.
We suggest the fitting to be made by professionals
15