Kenneth Cole VD35 Manual Del Usuario página 4

ADJUSTING DUAL TIME HANDS POSITION
* After setting or changing the battery, before setting the time, check if the dual time hour hand and dual
time minute hand are at the "0" (12 o'clock) position.
* If either the dual time hour hand or the dual time minute hand is not at the "0" position, reset it / them
following the procedure shown below :
1) Pull out the crown to second click (VD35) / first click (VD36)
2) Keep the buttons A & B pressed at the same time for more than 2 seconds, then release the buttons.
* Dual time minute hand moves and returns to where it was
3) Press button A or B to reset the dual time hands to "0" position.
* Button A : dual time hour hand and dual time minute hand move counter-clockwise
Button B : dual time hour hand and dual time minute hand move clockwise
* The dual time hour hand moves correspondingly with the dual time minute hand
* The dual time hour hand and dual time minute hand move quickly if the respective buttons are kept
pressed.
4) Push the crown back in the normal position.