Tabla de contenido
2
3
6
Pos.
4. Luchtinlaat
5. Starthendel
1. Beitel
6. Naaldvijluitrusting
2. Beitelhouder
3. Luchtuitlaat
Netherlands
Codenr.
Luna ..........................................................................................................................................
Aantal slagen* .........................................................................................................per minuut
Aantal naalden*.....................................................................................................................st.
Beitel/naaldslag...................................................................................................................mm
Naalddiameter x lengte .......................................................................................................mm
Geluidsniveau (EN ISO 15744).....................................................................................dB (A)
Trilling (EN 28662-1 & EN 28662-5+A1)........................................................................m/s²
Min. slangdiameter.............................................................................................................inch
Luchtinlaat..........................................................................................................................inch
Luchtverbruik bij 100% toevoer*.....................................................................................l/min
Luchtverbruik bij 20% toevoer* ....................................................................................l/min
Luchtverbruik bij 100% toevoer*.......................................................................................cfm
Luchtverbruik bij 20% toevoer*.......................................................................................cfm
Totale lengte........................................................................................................................mm
Gewicht .................................................................................................................................kg
Accessoires:
Platte beitel 20 mm ...................................................................................................................
Puntbeitel 35 mm ......................................................................................................................
Bouchardbeitel .........................................................................................................................
Volledige naalduitrusting ..........................................................................................................
Set naalden 3 mm/19 st.............................................................................................................
* Bij 6,2 bar
5
4
1
20023-0100
ACHN19-S
4400
19
33
3 x 180
100.5 / 90.1
2.7 / 1.6
3/8
¼
360
72
12,7
2.5
400
4.09
20023-1009
20023-1108
20023-1207
20023-1306
20023-1405
46
A combined, straight-shaped hammer for surface cleaning and use together with a needle-sha-
ped file, intended for cleaning of concrete, treatment of welds and other surfaces etc. A light-
weighted and flexible tool for simple needs. Onwards directed airflow (3) removes the dirt form
working surface. The tool is equipped with safety switch (5) and operated at a large blow speed.
Blow number can be adjusted by use of air regulator. The tool is delivered together with com-
missioned equipment of needle-shaped files (12 needles) (6) and 3 chisels (1).
Health hazards
• User of the tool should always take care of his and other persons' safety. The user must always
use personal protective equipment.
• Wear safety goggles, in order to reduce risk of eye injuries that could be caused by flying saw-
dust, dust and sparkles.
• Inhalation of dust can be harmful to health. Wear a suitable visor or breathing apparatus, when
working in a dusty environment.
• In case of continuous work wear safety gloves protecting against the cold air.
• In order to avoid eventual aural injuries, always use ear protection when using the tool.
• The user must always pay attention to the fact that continuous use of rotating and impact pro-
ducing manual tools could result in baneful influence on health caused by the vibration.
• Ergonomic load: Work with the tools related to recurrent, monotone movements and unfa-
vourable body positions may cause back, scruff, arm, marrowbone and other joint injuries.
Description
27
Tabla de contenido
