Cleaning And Maintenance; Storage Instructions; Troubleshooting - Concept OV1000 Manual De Instrucciones

EN

CLEANING AND MAINTENANCE

CLEANING
Disconnect the appliance from the mains prior to cleaning. This prevents electric shock or other accidents.
Let the appliance cool down properly prior to cleaning.
MAINTENANCE OF THE EXTERIOR OF THE APPLIANCE
Wipe the exterior of the appliance with a damp, soft cloth. Wipe the dust from the grid and the air inlet and outlet
with a cotton swab.
Only clean the exterior of the appliance. An attempt to clean the inside of the appliance may cause damage or injury.
WATER TANK MAINTENANCE
Empty the tank and then rinse the tank and the cover cap under running water.
WARNING! Do not use solvents, gasoline, xylene, or talcum to clean the appliance or water tank. This could result in
material damage or corrosion.

STORAGE INSTRUCTIONS

If you are not going to use the appliance for a prolonged period of time:
1. Empty and clean the water tank. Wipe it clean with a clean cloth and return it to the unit.
2. Place the dehumidifier in a box or original packaging so that dust does not settle on the unit. Store in a dry and
clean place.
TROUBLE SHOOTING
Before performing any of the following steps, first unplug the appliance from the electrical outlet.
Problem
The unit cannot be The power cord is not plugged in.
turned on.
Tripped circuit breaker.
The unit is damaged or needs to be
repaired.
The water tank is full or it is not properly
inserted into the unit.
The unit stopped The ventilator is overheated, causing the
to dehumidify. / unit to shut down.
There is no air
Air inlet or outlet is blocked.
coming out of the
air outlet.
36
Cause
Connect the power cord into the wall socket.
Reset the circuit breaker Contact an authorized
electrician if necessary.
Turn the unit off and disconnect the power cord
from the mains. Contact the customer service
centre.
Empty the tank and put it back, making sure it
is properly placed.
Once the ventilator cools down, the unit will
automatically start to operate again.
Remove any obstructions that block the air
inlet or outlet.
Solution
OV1000