TechniSat DigiCorder HD Serie Manual De Instrucciones página 17

> Now use the arrow keys up/down to select the desired timer type.
> To accept the timer type, confi rm by pressing OK.
> When you have completed the programming, press the green function
key Accept, to transfer the data to memory.
Timer settings (Preliminary or Follow-up time)
During the EPG timer programming, the receiver receives the data of the
selected broadcast automatically from the EPG data. This allows the start and
end time of the broadcast being recorded to be saved precise to the minute.
However, there are often cases where the selected broadcast starts somewhat
earlier or later than is specifi ed. In this case, the recorded broadcast will miss
out either the start or the end. To solve this problem, you can set preliminary or
follow-up time in one minute steps. The timer now starts earlier at the specifi ed
preliminary time and ends at the set follow-up time later than specifi ed in the
EPG data.
> Press the red function key Timer to open a selection window.
> Use the arrow keys up/down to highlight the line Timer settings.
> Confi rm by pressing OK. A menu appears for adjusting the preliminary
or follow-up time.
> Use the arrow keys up/down to highlight the line Timer preliminary time
or Timer follow-up time..
> Use the numeric keys to enter the desired preliminary or follow-up time
in minutes.
> Press the green function key Save, to save the setting and to return to
the timer overview.
Timeshift function
The timeshift function allows you the possibility to activate both playback and
recording at the same time. This allows time-delayed TV viewing and allows
you to view the start of the recording and thus jump throughsections that have
already been recorded. At the same time, the recording of the live signal of the
broadcast continues.
> To access a specifi c section of a current recording, the functions Play
and Pause are available, as well as Fast Forward and the jog shuttle.
> Pressing the Info button causes the Infobox to appear with a status bar
displayed, which shows the playback and recording duration.
Setting highlighters while recording
> Press the Record key to open a window showing the functions available.
> Use the arrow keys up/down to highlight the line Set highlighter, confi rm
by pressing OK. A highlighter will now be set at the current position.
Continue in this manner to set highlighters at all desired places. high-
17