Microphone Connection; Power Connection - Mr Handsfree CAR-KIT PRO Manual Del Usuario

2. Bracket Mounting (most advisable mounting method)
• Place the supplied bracket (6B) on the location
where you want to install your mr Handsfree by
using the screws.
• Place the mr Handsfree on the bracket first by
pressing and than sliding it in the correct position.
You will hear a click sound when the unit is
installed correctly.
MOUNTING YOUR MOBILE PHONE
• Remove the cover of the adhesive piece on the back
of the magnet (8B) and press firmly to the correct
location on the back of your mobile phone.
• Remove the 2 covers of the adhesive pieces on the
back of the magnetic holder (8A) and place it at the
most convenient and visible location on your
dashboard.
• Now you can attach your mobile phone to the
magnetic holder.

MICROPHONE CONNECTION

• Place the microphone (5) on the dashboard using
Velcro.
• Connect the microphone cord plug to the mr
Handsfree microphone jack (1).
• Now use the three clips (7) to guide the microphone
cord.
IMPORTANT !
For optimum performance, the microphone should be
located at least 40-50 cm from the drivers' mouth.
Make sure that the microphone is directed towards
the driver.

POWER CONNECTION

• Do not operate your appliance on a positive ground
electrical system.
• Remove the vehicle's cigar lighter from its socket and
insert your mr Handsfree power cord (3) into the
cigar lighter socket of your car. The LED indicator of
the power plug will light GREEN.
• LED indicator of mr Handsfree unit will light YELLOW.
This means that your mr Handsfree Car Kit is in ON
position.
IMPORTANT !
MR HANDSFREE CAR KIT is equipped with ultra wide
(12/24 V DC) power supply adapter. This makes it
possible to use the mr Handsfree in vehicles with
different values of on-board voltage.
Only ALCATEL connector CANNOT be used with 24 V
DC.
GB–2