Tabla de contenido
Idiomas disponibles
Idiomas disponibles
USER MANUAL
GB
Code scan for VCR, SAT, DVD, CD, TAPE, TUNER and
AMP
To complete a code scan for VCR, SAT, DVD, CD, TAPE, TUNER or AMP,
proceed as described for a TV code scan. Complete above steps A to G, using
keys
/
or
, or
VCR
SAT
DVD
and
/
and
/
SHIFT
CD
SHIFT
TAPE
SHIFT
At step E,
for SAT and AMP, press the
for VCR, DVD, CD and TAPE, press the
for TUNER, press key
.
2
Finding out what code number you are using
If you have programmed your remote control by means of the automatic code
scan, or if you have forgoten the code you have stored then the following
procedure will replay the codes being used.
A. Press the
key of your remote control for approx. 4 seconds until the
TV
LED flashes twice.
B. Enter code
, using the numerical keys. The LED flashes twice.
0
0
2
C. Press key
and count the number of LED flashes. This number
1
corresponds to the first digit of the code.
D. Press key
and count the number of LED flashes. This number
2
corresponds to the second digit of the code (if the digit is 0, the LED does
not flash).
E. Press key
and count the number of LED flashes. This number
3
corresponds to the third digit of the code (if the digit is 0, the LED does not
flash).
F. Steps C, D and E can be repeated as often as necessary.
To read the currently used code for the control of a VCR, SAT, DVD/AUX, CD,
TAPE, TUNER or AMP device, proceed as described above for your TV SET.
Complete steps A to F, pressing the
key respectively.
Write down the code number as indicated by the LED.
Programming for AUX devices
If the remote you have purchased has a separate AUX key then this can be
used to operate a second TV set, video recorder, satellite receiver/cable box,
CD player, tape recorder, tuner or amplifier. To program your remote
control for a second device, proceed as follows:
1. Press the
key of your remote control until the LED flashes twice.
AUX
2. Press
key for a second TV set,
TV
key for a second video recorder,
VCR
key for a second satellite receiver or cable box,
SAT
keys
and
for a second CD player,
SHIFT
CD
keys
and
for a second tape recorder,
SHIFT
TAPE
keys
and
for a second tuner,
SHIFT
TUNER
keys
and
for a second amplifier.
SHIFT
AMP
3. On the numerical keypad, enter a 3-digit code from the enclosed list.
4. The LED flashes twice, indicating that the code has been accepted.
and
or
and
respectively.
TUNER
SHIFT
AMP
key;
key, and
,
,
,
,
,
VCR
SAT
DVD
CD
TAPE
TUNER
4
GB
Special functions of your remote control
Brightness / Colour / Contrast / etc.
Adjusting brightness / colour / contrast / bass / tremble / balance at your TV
set, using the universal remote control:
1. Ensure that your remote control is set to TV (press
2. Press the
3. Within 5 seconds, press
for brightness,
1
for contrast,
3
for bass,
5
4. To adjust the settings use the
5. After 5 seconds, your remote control returns to standard mode for the
selection of channels.
OK key
• At TV level The basic settings of your TV SET are activated
• At TV level / menu Confirmation key for settings
• At VCR level Record button (press key twice)
• At SAT level Confirmation key for settings
• At DVD level Confirmation key for settings
• At TAPE level Record button (press key twice)
Please write down the 3-digit codes of your devices for future reference.
Depending on the remote control model, you might have to reprogram me
the universal control device after a battery change.
TV
VCR
SAT
or
DVD/AUX
AMP
CD
TAPE
TUNER
AMPLIFIER
USER MANUAL
key.
SHIFT
for colour,
2
for tremble,
4
for balance.
6
and
VOL +
VOL -
5
key).
TV
keys.
Capítulos
Tabla de contenido
