Assembly And Operation - oneConcept 10032234 Manual De Instrucciones

ASSEMBLY AND OPERATION

Before assembling the product, please refer to „Packing Content" to confirm that all
parts and accessories of this product have been received.
1
Take out the four pieces
universal wheels, put the
machine upside down,
connecting the four wheels
into the four assembly
holes in the machine.
3
Insert the accessories connector into the
corresponding ground brush connector.
If the ground brush has round connector,
you can connect the telescopic tube
directly, if the ground brush's connector
is not round you have to install the
adapter connector before you insert the
telescopic tube.
Place the elbow on the hose connector at the front of the
vacuum cleaner, plug it to the end till it locked. If you
want to remove the hose, press the buttons on both sides
of the hose connector, Press it directly after the hose
connector can be drawn out
Insert the lower end of the telescopic
pipe (small diameter) into the ground
brush connector, force it to the end. The
end users can automatically adjust the
length of the telescopic tube according to
the appropriate height of the individual.
2
4
EN
11