Data Lock/Release/Storage; Data Access - ADInstruments AD6412 Manual De Usuario

_______________________________________________________________________________

5. Data Lock/Release/Storage

In the process of resistance measurement, press HOLD key to lock the current show
value, displaying HOLD symbol. Then press HOLD key to release locking, HOLD symbol
would disappear and can continue to measure.
When AD6412 is in the measurement of the resistance or current, press the SET key to
lock the current show value, showing HOLD symbol, while take this locked value as a
data unit and have it automatically numbered and stored. Then press SET key or POWER
key to cancel locking, the HOLD symbol would disappear, returning to the measurement
state. Repeat the above operations, a total of 50 units data can be stored. When memory
is full, MEM symbol would flashs display.
As indicated in Figure 9, lock the measured resistance 0.016 , and save it as data unit
No.1.
As indicated in Figure 10, lock the measured current 278mA, and save it as data unit
No.50.And the memory is full now.
In the access mode, press MODE key to switch to the measurement mode, then the
operation can be done to lock and save data.
In the setting state of alarm critical value, it is required to press down POWER key or SET
key for 3 sec to quit from the setting state of alarm critical value before operating locking
and saving function.
Switching on after shutdown will not lose the saved data.

6. Data Access

Press MODE key to enter the Access Mode of the stored data, and the default to display is
the data unit No.01 stored, as shown Figure 11. Then press SET key to turn down to
browse the saved data. On browsing the last data unit, it returns to the data unit No.01.If
no stored data, as shown in Figure 12.
In the setting state of alarm critical value, it is required to press down POWER key or SET
key for 3 sec to quit from the setting state of alarm critical value before pressing MODE
key to switch to the access data mode.
©Copyright Abacanto Digital SA.
Manual de usuario AD6412
AD Instruments
38