Klarstein VALKYRIE Manual De Instrucciones página 26

EN
26
INSTALLATION
• Choose the proper regulator according to appliance category and gas pressure in
the table above, for example, Use 37 mbar regulator with appliance category I3+
for propane gas.
• Marking on injector, for example, 0.82 indicates that the size of the injector is
0.82 mm.
Remark:
• SB means with side burner; Allow to put a pan on the side burner. (The diameter of
pan is max ø 24 cm and mix ø 8 cm).
• BB means with back burner.
Mounting steps
Make sure your grill is assembled properly. Detailed assembly instructions are packed
with each grill giving specific assembly procedures for each model. Follow these
instructions carefully to ensure the correct and safe assembly of the grill.
Caution: Although we take every effort to ensure that the assembly process is as easy as
possible, it is inherent with fabricated steel parts that corners and edged can cause cuts
if improperly handled during assembly procedures. Be careful while handling any parts
during assembly. It is strongly recommended that you protect hands with a pair of work
gloves.
Preparation
• You will need LPG gas bottle and proper regulators under the gas pressure to
operate this gas grill. The regulators should be comply with EN12864 with current
version and national regulation.
• After purchasing your gas cylinder you will then be ready to set it up with your gas
grill.
• When changing the gas cylinder which shall be carried out away from any source
of ignition. Position the gas cylinder at left side or inside of your BBQ, keeping in
mind that the bottle must be kept away from heat and in a safe position.
• When ready to use your gas grill insert the regulator into the gas bottle valve and
tighten firmly.