Charging The Battery - LEGEND EBIKES Siena Manual De Usuario Y Garantía

GETTING STARTED_

CHARGING THE BATTERY

Before using your bike for the first time, you should charge the battery for 4 to 6 hours using
the included charger.
1. Connect the charger to the socket. You will notice that the charger light turns green,
meaning that the unit is working properly.
2. Connect the charger to the battery. The charger light turns red while the battery is
charging. Remember that you can charge your battery while it is inside the bicycle through
the connector on the left side of the frame, or charge it off the bike if you prefer.
3. When the battery is fully charged, the charger light will return to the initial green colour.
4. To disconnect the charger, it is recommended first to disconnect the battery and then the
power socket.
[EN]
5. With the battery fully charged, the charging time is between 6 to 8 hours and will always
be dependent on the use given to the bicycle.
6. Electricity consumption in each battery charge is from 374 to 504Wh depending on
battery model.
7. Do not cover the charger or the battery during the charging process.
Use only the original charger to charge the battery, otherwise the
battery and electronic devices will not be covered under warranty.
14
Location of charging
Open de cover
Connect the charger