Operating Times; Operation - Wolf Garten LYCOS E/500 T Manual De Instrucciones

EN
Attaching the middle handle
Place the middle handle on the grass trimmer
Fasten the middle handle with the hexagon screw
and the star screw to the grass trimmer
Note
handle.
Attaching the plant protection bow
The plant protection bow protects shrubs, trees and
bedding plants during trimming.
Pull the plant protection bow apart slightly so that
it can be attached to the trimmer
Insert the plant protection bow into the mounting
on the trimmer until it latches in
Note
During edge cutting the plant protection bow
Settings for operation
Risk of injuries posed by the
cutting tool.
Only adjust the device with the motor
standstill.
Do not reach into the area of the rotating
line.
Pull the mains plug before any work on
the device!
Setting the telescopic arm
The telescopic arm can be set to the user's height.
Open the quick-release fastener
Pull the telescopic arms apart or push them to-
gether until the ideal height is obtained
Close the quick-release fastener
Setting the middle handle
The middle handle can be set for easier work at
various incline positions.
Release the star screw on the middle handle
Set the desired incline
Retighten the star screw on the middle handle
22
(Typ 2)
(Typ 2)
.
.
WARNING!
.
.
(Typ 2)
.
Setting the working angle of the trimmer head
. The trimmer head of the lawn trimmer can be set
. working. This allows you to easily reach problematic
Press and hold the locating button
Set the operating angle
Release the locating button.
The head of the lawn trimmer engages audibly.
Setting the edge-cutting function
The edge cutting function enables precise trimming
along the lawn edge
until it latches in
Press the locating button
left
Release the locating button.
The trimmer head audibly engages.
Note
For normal trimming/cutting, the plant pro-
the trimming line.
Risk of injuries posed by the
cutting tool.

Operating times

. Observe the times stipulated in local byelaws.
Check with your local authorities to determine if
there are any operating time limitations.
Guiding the cable through the strain relief
The strain relief in the control handle prevents acci-
. dental disconnection of the extension cable.
Fasten the extension cable in the strain relief as
. shown.
.
.
– only required for Typ 2.
.

Operation

WARNING!
tool comes to a standstill, and pull out
the mains plug before you perform
adjustments or other work to the device.
Operation
.
while simultane-