Emist EPIX360 TruElectrostatic Manual Del Usuario página 8

EN
8
ASSEMBLY & OPERATING INSTRUCTIONS
Tip: Charge battery first
1. Plug charger cord into wall outlet.
2. Install battery into charger.
3. Reference power indicator (3 bars = full charge)
Step 1: Install Battery into Charger.
y To install, slide battery pack into the charger until the battery pack is
firmly seated. It will click into the slot.- Note: Some chargers might
require more force on first seat.
y Once battery is on the charger, a flashing red light indicates the battery
is charging.
y Once the battery is fully charged, a solid red light will indicate the batter
is fully charged.
- Tip: A fast blinking light on the charger indicates battery pack is not
seated correctly.
y To remove battery from charger, grasp battery pack firmly, depress
battery pack button down, and slide out from the charger.
y To check charge, press down on the battery indicator light, the light will
illuminate 3 green bars when battery is fully charged.
Step 2: Liquid Tank Removal:
y To remove the 8oz tank from the spray system hold the tank cap cover
and the tank while gently pulling up the front of the tank from the spray
system to remove it from the tank lock. Then pull up on the back to
remove it from the tank back clip.
y This removes the whole tank assembly from the sprayer.
Step 3: Removing the Tank Cap Cover & Cap.
y With the tank removed from the sprayer and holding it vertically, pull the
tank cap cover straight up. No twisting is required.
y To remove the tank cap, gently turn the cap counterclockwise until it is
fully removed from the tank.
Step 4: Installing the Tank Liner:
Tip: When you first receive your sprayer bundle, a tank liner is already
installed in the tank for you. It includes the cap washer which is
required for the liner to sit correctly into the tank itself. The liner is
manufactured to last 100 spray hours or up to 3 months.
y When replacing your tank liner, first remove the used liner from the tank
with the black cap washer by firmly holding the tank.
y Once removed from the tank, remove the liner from the black cap
washer by holding the liner firmly in one hand, and pushing upwards on
the washer to remove it from the liner threads.
y Get new liner, push the black cap washer on by pushing it down around
the spout of the liner. Push the cap washer until the top of the liner spout
and washer are flush with each other.
y Once the liner is installed with cap washer, fold the liner in an accordion
style and slide it into the tank until the cap washer is flush with the tank
opening.
Copyright ©2021 SanoTech 360, LLC. All rights reserved. All product names, logos, and brands are property of their
respective owners. Prices are in U.S. Dollars. Prices are subject to change. All use of the website and resources is
subject to the Terms of Use. EMI-018-21 Multilingual Manuals - 052721